GN 2342 Assembly Pins Stainless Steel
Photo
Identification no.: 2 - With cross hole for spring cotter pin GN 1024
Product description
Information
Assembly pins GN 2342 are characterized by their use in diverse applications.
Depending on the requirement there are three washer types to choose from, which place the assembly pin in an axial position in its insertion direction. With the washer with eyelet (Type E) the assembly pin and a corresponding GN 1024 spring cotter pin can be secured to prevent loss using a retaining cable or ball chain. The washer with mounting shackle (Type L) simultaneously acts as loss protection and anti-rotation protection.
Assembly pins according to identification no. 2 are secured against falling out via a transverse drill hole which is aligned to the GN 1024 spring cotter pin.
The technical annexe contains the load capacities for the double-sided shearing resistance (breaking strength).
Specification
Assembly pin
Stainless steelNI AISI 304
Washer
Stainless steel
- Type B: turned AISI 304
- Type E: metal injection molded AISI 316 LHC
- Type L: sintered AISI 316 LHC
Countersunk screw
- Stainless steel AISI 304
- Not removable loctited
RoHS
Accessory
Spring Cotter Pins GN 1024
Ball Chains GN 111
Ball Chains GN 111.5
Retaining Cables GN 111.2
Retaining Cables GN 111.2
Key Rings GN 111.3
Technical drawing
Article options / Table
Type
| B | With plain washer |
| E | With washer with eyelet |
| L | With washer, with mounting shackle (only identification no. 1) |
Identification no.
| 1 | Without cross hole |
| 2 | With cross hole for spring cotter pin GN 1024 |
| d1 h9 | l1 | d2 | d3 | d4 | d5 | l2 | l3 | l4 | l5 | l6 | l7 | s1 | s2 | suitable key ring Ø for type E | suitable spring cotter pins for identification no. 2 |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 16 | 20 | 24 | 28 | 30 | 32 | 2,5 | 12 | 2,5 | 4,3 | 5,5 | 7 | 13,5 | 18 | 10 | 2 | 3 | 4 | 14 | - | - | GN 1024-NI-2-D |
| 8 | 35 | 40 | 45 | 50 | 55 | 60 | 2,5 | 12 | 2,5 | 4,3 | 5,5 | 7 | 13,5 | 18 | 10 | 2 | 3 | 4 | 14 | - | - | GN 1024-NI-2-D |
| 10 | 20 | 24 | 30 | 35 | 40 | 45 | 2,5 | 15 | 2,5 | 4,3 | 6 | 7 | 15 | 21 | 11 | 4 | 3 | 4 | 14 | - | - | GN 1024-NI-2-E / ...-D |
| 10 | 50 | 55 | 60 | 65 | 70 | 80 | 2,5 | 15 | 2,5 | 4,3 | 6 | 7 | 15 | 21 | 11 | 4 | 3 | 4 | 14 | - | - | GN 1024-NI-2-E / ...-D |
| 12 | 20 | 24 | 30 | 35 | 40 | 45 | 2,5 | 17 | 3 | 5,3 | 7 | 9 | 18,5 | 23 | 12 | 4 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-2-E / ...-D |
| 12 | 50 | 55 | 60 | 65 | 70 | 80 | 2,5 | 17 | 3 | 5,3 | 7 | 9 | 18,5 | 23 | 12 | 4 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-2-E / ...-D |
| 16 | 32 | 35 | 40 | 45 | 50 | 55 | 3,5 | 22 | 3 | 5,3 | 8 | 9 | 21 | 28 | 15 | 6 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-3-E / ...-D |
| 16 | 60 | 65 | 70 | 80 | 90 | 100 | 3,5 | 22 | 3 | 5,3 | 8 | 9 | 21 | 28 | 15 | 6 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-3-E / ...-D |
| 20 | 40 | 45 | 50 | 55 | 60 | 65 | 4,5 | 26 | 3,5 | 6,4 | 10,5 | 9 | 24 | 31 | 17 | 6 | 4 | 5 | 14 | 18 | 24 | GN 1024-NI-4-E / ...-D |
| 20 | 70 | 80 | 90 | 100 | - | - | 4,5 | 26 | 3,5 | 6,4 | 10,5 | 9 | 24 | 31 | 17 | 6 | 4 | 5 | 14 | 18 | 24 | GN 1024-NI-4-E / ...-D |
Build & Price
Application example
|
Load capacity of ball lock pins
|
Information At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage. The values were arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values. An appropriate safety factor must be taken into account in the design. |
||||||||||||||||||||||||||
|
Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength) |
|||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||
Selected Part (How to order)
CAD-Daten fordern Sie bitte auf Wunsch an.
gross 8,70 €
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount
Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
Do you find your product ?
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
This could also be interesting...
